MR756 |
RFQ for MR756 Required Field |
 |
| Product | Manufacturers | Pack | D/C | |||||||
| MR756 | - | DIP | 03+ |
The signal from a synchro receiver or a variable resistive cam follower (potentiometer) is boosted by operational amplifier U1, whose output swing is limited by back-to-back zeners D3 and D4. The signal is then applied to operational amplifiers U2 and U3, which drive the gates of Q1 and Q2 respectively. The npn transistor (Q3) is a fast current limiter for the n-channel MTM8N10; a pnp transistor (Q4) performs the same function for the p-channel MTM8P10. Capacitors C3 and C4 eliminate the need for accurate dc offset zeroing. T1 steps up the output voltage to 120 V for the 400 Hz servo motor.
Features |
| ·Low Cost·Low Forward Voltage Drop·High Current Capability·High Surge Current Capability·Low Leakage |
| MCC Catalog Number |
Device Marking |
Maximum Recurrent Peak Reverse Voltage |
Maximum RMS Voltage |
Maximum DC Blocking Voltage |
| MR750 | --- | 50V | 35V | 50V |
| MR751 | --- | 100V | 70V | 100V |
| MR752 | --- | 200V | 140V | 200V |
| MR754 | --- | 400V | 280V | 400V |
| MR756 | --- | 600V | 420V | 600V |
| MR758 | --- | 800V | 560V | 800V |
| MR7510 | --- | 1000V | 700V | 1000V |
| Models | MFG | Pack |
| MR750 | 07+ | |
| MR750G | ||
| MR750RLG | ||
| MR751 | ||
| MR751G | ||
| MR751RL | 07+ | |
| MR751RLG | ||
| MR752 | ||
| MR752G | ||
| MR752RL | ||
| MR752RLG | ||
| MR754 | ||
| MR754G | ||
| MR754RL | on | |
| MR754RLG | ||
| MR7552 | ||
| MR756 | DIP | |
| MR756G | ||
| MR756RL | N/A | |
| MR756RLG | ||
| MR760 | ||
| MR760RL | ||
| MR754RL | ||
| MR754FR | ||
| MR754 | ||
| MR752RL | ||
| MR752FR | ||
| MR752 | ||
| MR751RL | ||
| MR751FR | ||
| MR7510FR | ||
| MR7510 | ||
| MR751 | ||
| MR750RL | ||
| MR750FR | ||
| MR750 | ||
| MR73D | ||
| MR7 | ||
| MR-6A | ||
| MR61D | ||
| MR-5A | ||
| MR57T01601J |
